|Local forecast by
Instructions for Requesting a
Web Based Spot Forecast
Following are descriptions of the information fields on the page:
1 - Project Name:
Typically fires in the
Western U.S. have names with respect to the river drainage basin they are
in. If your fire has a name, go ahead and put it in. Otherwise, lets say the
fire is 2 miles north of Wilmington, NC, enter 2N of Wilmington, NC.
Essentially put in something that you will be able to reference on the Spot
Request Page because this is a required field.
2 - Requesting
Agency: The Requesting Agency name and phone number are
required. Fax number and contact person are optional, but we consider
those very important if we have any questions or if there is a breakdown
in dissemination capabilities. You will only need to enter your agency
name, phone/fax numbers, and your name the first time you request a spot
forecast. After that, it will be filled in with the same information as
your last request. Please note that no other people other than the user
and the NWS will see this information!
- Select the type of project (either a
wildfire or a prescribed burn. Do not worry about what WFU is). If it is a
prescribed burn, please enter in
the Ignition Time (using the 24 hour clock) and Date. The form defaults to
an ignition time about ½ hour into the future. If it is a wildfire, you do
not have to worry about the default ignition time.
3 - Location: You have a couple of
options on this one, but they are important with respect to having the
location appear on the map. Proper location data will give us detailed map
information for the fire and the terrain in the area.
4 - Elevation: The top and bottom elevations of the fire are required.
You can just enter the numbers and do not need to mention the word
feet. If the burn or fire is on flat ground, you can enter a value in only
one of the boxes.
- Enter the Latitude and Longitude of the fire (you can either specify
degrees like 45.1486 or degrees/minutes/seconds like 45 13 34). For
supplemental information you can reference the 7.5' USGS Quadmap,
but you still need to provide the Lat/Lon.
- Note: As of 4/8/02, the Legal Township/Range (T/R) section is mainly
for locations in the Western Region of the National Weather Service, so
inputting Lat/Lon information is the required method. The National
Weather Service will be looking into this function for all areas in the
5 - Aspect: This field is required and important to know which side of a
mountain the fire may be on. Use direction references such as N, NE, E,
SE, S, SW, W, NW. If the fire or burn is in flat terrain (as is usually
the case across the Eastern Carolinas), you can type in
the word FLAT.
- Drainage is optional and once again references the river drainage
basin the fire is in. If you know it, you can enter it. For example if the
fire is near Conway, SC, you could enter Waccamaw River Basin, for the
Waccamaw River which runs through Conway.
Note that you will be flagged when submitting the request that if
possible, we would like the drainage information. If you do not know it,
go ahead and just submit the request anyway.
6 - Size: Enter the acreage if known, but it is an optional field.
7 - Fuel: Please indicate the type of fuel, either using fuel model
numbers, or a description of the fuel such as grass, ponderosa pine, etc.
Also, if you can indicate the amount of fuel sheltering, it helps us
tremendously in providing accurate wind forecasts.
8 - Observations: Although it is considered optional in the program, it
is required to get a spot forecast from the NWS. Please enter in the
information with respect to the observation. For each observation we
need to know where it is in relation to the burn, the elevation in feet,
and the time (preferably using a 24 hour clock). The wind (in mph) can
be specified as N12 Gust 25 or something like that. The temperature
and wetbulb values (in degrees F) should be entered and the RH (in
percent) and Dewpoint (in degrees F) can also be entered if known,
otherwise they will be calculated for you. Finally, any remarks about
clouds, weather, or other important information should be entered in the
9 - Primary Forecast Elements: Not all spot forecasts are created
equal, so we are asking you to tell us what are the forecast elements
you need, or are particularly important. There are six parameters listed
for you. Select which ones you want a forecast for, and for the time
period(s) you would like as well (available times are Today, Tonight,
10 - Remarks: If a meteorological parameter is not listed and you
would like to have Haines Index for example, enter that information in
the Remarks section. You can also enter in information with respect to
when you might want the forecast, or any other information/input you
can give to us with respect to the spot forecast request.
11 - Action: You now have three options. You can Submit Request,
Cancel Request, or Clear Form. When you hit Submit Request,
various checks are performed on the data you have entered. Some
problems make it impossible for your request to be accepted (for
example, if you forget to enter a name for the burn), while others will
produce warnings and messages for your information. If an error is
found, you will be taken to a page that describes the errors or minor
problems. You can click on Go Back and Fix and have the opportunity
to make the necessary changes. You can click on Submit Request
anyway, but more than likely we will probably be sending back a
question or calling. You do have one more option and that is to Cancel
- After you have submitted a spot forecast request, an individualized
spot forecast web page becomes available for that burn. The page
automatically updates every minute so that as new information
becomes available for the burn, you see it immediately. Detailed maps
of the area around the burn are generated and displayed when they
- Once the forecast is COMPLETED and made available to you, the
page will not update anymore. Thus if we have to update the forecast,
we would be calling you to inform you of the upcoming change, since
the page no longer updates or has a way to inform you that a change
has been sent. When you go back into the forecast, the only way you
might pick up on the changed forecast is at the top of the page it shows
the time that the spot was requested and the time it was issued. The
issue time will have changed. Keep in mind that "sensitive"
information like your name, phone number, and the exact
location of the burn are NOT visible to others - only to you and
- If we have questions about your request, we may send you back a
question about it. If this happens, the Status Box will show the word
QUESTION and the box on the map will turn purple. Click on this and
you will see a big red box in the forecast page with our question.
Usually there is some problem with the request that you can probably
fix (use the CHANGE REQUEST link to do this, make your changes if
necessary, then submit the request once again. The purple box will
return to green and the word QUESTION will change back to
PENDING) or you can call us.
- When your forecast is complete, it will show up in the spot forecast
web page (clicking on the red box in the map or COMPLETED in the
Status Box can access the spot). On the forecast page a Feedback box
will appear where you can provide us information with respect to
how the forecast worked out, perhaps later in the day or several days
down the road. This feedback helps us to improve. Simply type your
feedback into the box and click on Send Feedback.
- At the bottom of the forecast page are links for actions that you can
take. For example, you can go "Back to Spot List" to return to the
monitor page. If you are on the same computer where you made the
original request, you can click on "Change Request" to change the
details of your request. This is what you would do if we send you a
question and you need to change some information. If you need to
delete a request, simply click on "Delete Request".
- You can also click on "Copy Info to New Spot Request". This is
helpful for burns that last over several days. Rather than having to
re-enter the data in the form to get a new forecast, you can view the
previous spot request and then copy all the location parameters to a
new request using this link. This will save you some time when filling
out the request form.
- Invariably, something will go wrong at some point, and you
might not be able to request or receive spot requests via the
web page. In such cases, you can call in or fax us the spot
to go to submit a web based spot forecast request